Free calculator
Sun rising over solar panels

By Aakash Pawar · Last updated: 15 Oct 2026

How Much Solar Do I Need for My House? 1 kW to 10 kW Size Guide (India)

Quick answer: how much solar do I need for my house?

Most Indian homes need a 2 to 5 kW solar system. To find yours, divide your monthly electricity units by 120: 360 units needs 3 kW and 600 units needs 5 kW. In panels, that is about 2 panels of 550 W for every 1 kW: 6 panels for 3 kW, 9 to 10 for 5 kW and 18 to 19 for 10 kW. The table below starts from the system size, and the sections after it show how to work it out from your bill. Click any link and our free calculator opens on the System size tab with that size already filled in.

System size Panels (550 W each) Monthly units covered Panel area See your savings
1 kW 2 About 120 About 5 m² Calculate for 1 kW
2 kW 4 About 240 About 10 m² Calculate for 2 kW
3 kW 6 About 360 About 16 m² Calculate for 3 kW
4 kW 8 About 480 About 21 m² Calculate for 4 kW
5 kW 9 to 10 About 600 23 to 26 m² Calculate for 5 kW
10 kW 18 to 19 About 1,200 46 to 49 m² Calculate for 10 kW

These are estimates for India at about 5 peak sun hours a day. If you use 400 W panels instead, you need roughly 1.4 times as many.

How to calculate how much solar you need

Divide your monthly electricity units by 120 to get the system size in kW, then divide by the wattage of one panel to get the panel count. Use these two steps:

System size (kW) = Monthly units (kWh) ÷ 120

Number of panels = System size (kW) × 1000 ÷ Panel wattage (W)

Why 120? One kW of panels makes about 5 peak sun hours × 30 days × 0.8 (after heat, dust and wiring losses) = 120 units a month. In very sunny areas such as Rajasthan and Gujarat you may get closer to 130-140 units, and in cloudier areas closer to 100.

Worked example. Your bill shows 450 units a month.

  1. 450 ÷ 120 = 3.75 kW, which rounds up to a 4 kW system.
  2. 4 kW × 1000 ÷ 550 W = 7.3, so you need 8 panels.

You can skip the maths: open the calculator with 450 units filled in, then change the number to match your own bill. Use your yearly average, because summer bills with AC use are higher than winter ones.

Find your size from your electricity bill

A 300-unit bill needs about a 2.5 kW system, or 5 panels of 550 W. Find your monthly units in the table, then open the calculator with that bill filled in. The calculator rounds up to the next half kW and uses your city’s sunlight, so its answer can differ slightly.

Prefer to enter rupees? Choose the Monthly bill tab in the calculator and type what you pay. If you already have a quote in kW, choose the System size tab.

Your monthly units Suggested size Panels (550 W) See your savings
150 1.5 kW 3 Calculate for 150 units
300 2.5 kW 5 Calculate for 300 units
500 4.5 kW 9 Calculate for 500 units
800 7 kW 13 Calculate for 800 units

Already have a quote? Check it with our solar quote checker before you pay.

How much solar each system size gives you (1 kW to 10 kW)

How many solar panels for a 1 kW system?

About 2 panels of 550 W (1.1 kW). A 1 kW system makes around 4 units a day, or 1,400-1,500 units a year, which suits a small flat with light use. Calculate for 1 kW.

How many solar panels for a 2 kW system?

About 4 panels of 550 W (2.2 kW). It covers roughly 240 units a month, enough for a small family home with fans, a fridge, a TV and an AC used a few hours a day. Calculate for 2 kW.

How many solar panels for a 3 kW system?

About 6 panels of 550 W (3.3 kW), or 8 panels of 400 W. This is the most common home size and covers roughly 360 units a month. It also reaches the maximum central subsidy. Calculate for 3 kW.

How many solar panels for a 4 kW system?

About 8 panels of 550 W (4.4 kW). It suits larger homes or homes with two to three ACs, covering about 480 units a month. Calculate for 4 kW.

How many solar panels for a 5 kW system?

About 9 to 10 panels of 550 W, or 13 panels of 400 W. It covers about 600 units a month and fits big homes with several ACs, or a small shop. Calculate for 5 kW.

How many solar panels for a 10 kW system?

About 18 to 19 panels of 550 W. It covers about 1,200 units a month and suits bungalows, clinics and small offices. Larger systems often need a three-phase connection, so check with your electricity distribution company. Calculate for 10 kW.

How many solar panels for a 2 ton AC?

A 2 ton inverter AC running 8 hours a day needs about 2 to 2.5 kW of solar, which is 4 to 5 panels of 550 W. An inverter AC draws roughly 1 to 1.25 kW on average while it runs, so 8 hours a day for 30 days is about 240-300 units a month. Divide by 120 and you get 2 to 2.5 kW.

Two cautions. A non-inverter AC draws more power, so it needs more panels. Solar only runs the AC in daylight, so at night you still use grid power unless you add a battery. These are approximate figures; your AC’s star rating and how long you run it change the result. Calculate for a 2 ton AC (about 300 units).

Roof space and what changes the number of panels

Plan on about 5 m² (roughly 55 sq ft) of panel area per kW with 550 W panels, and more once you add gaps between rows and walkways. Many installers plan around 80-100 sq ft of shadow-free roof per kW, so ask yours to measure your roof before you decide.

Five things change your panel count:

  • Panel wattage. 550 W panels need about 30% fewer panels than 400 W ones for the same kW.
  • Sunlight in your state. The same bill needs fewer panels in Rajasthan than in Kerala.
  • Shade and dust. Water tanks, parapets and nearby buildings cut output, so keep the array clear of shadows.
  • When you use power. Solar makes power in the day. If most of your use is at night, you depend more on net metering or a battery.
  • Future needs. An EV or a new AC can justify sizing up by a kW or two.

To see how much capacity your roof can hold and what it saves, use the rooftop solar calculator, and compare states with solar payback by state.

PM Surya Ghar subsidy by system size

The central subsidy stops growing at 3 kW, so a 3 kW system gets the same ₹78,000 as a 5 kW or 10 kW home system. Residential rates reported by 2026 guides:

System size Central subsidy
1 kW ₹30,000
2 kW ₹60,000
3 kW and above ₹78,000 (maximum)

To qualify, your system must use ALMM-listed modules that meet the Domestic Content Requirement, installed by an empanelled vendor, with the application made on the official portal. Rates and rules can change, so confirm them at pmsuryaghar.gov.in before you pay. For the steps and deadline, read our PM Surya Ghar subsidy guide, and enter your subsidy in the calculator’s Subsidy box to see payback after it. Ready to apply? Follow our step-by-step PM Surya Ghar application guide for the documents, the portal steps and the mistakes to avoid.

Five mistakes that give you the wrong solar size

  1. Sizing from the roof, not the bill. A big roof does not mean a big system. Power beyond what you use is exported, and in many places that earns less than you pay for electricity, so extra kW can add less than it costs.
  2. Using a summer peak bill. AC months push units up. Use your average over the year, or the system will be oversized for most of it.
  3. Comparing panel counts instead of kW. Six panels of 400 W make 2.4 kW, not 3 kW. Always ask for the total kW and the panel wattage in writing.
  4. Ignoring shade. Water tanks, parapet walls, staircase rooms and nearby buildings cut output. Ask your installer to check shadows at different times of day before fixing the layout.
  5. Expecting a bigger subsidy from a bigger system. The central subsidy stops growing at 3 kW, so go above 3 kW only if your bill needs it.

Got a quote? Compare its kW, not its panel count, in our solar quote checker.

Frequently asked questions

How much solar do I need for my house? Divide your monthly units by 120 to get the size in kW. A home using 300 units a month needs about 2.5 kW, 450 units about 4 kW and 600 units about 5 kW.

How many kW of solar do I need for a 3 BHK home? It depends on your bill, not the number of rooms. A 3 BHK using 300 units a month needs about 2.5 kW, and one with two ACs using 500 units needs about 4.5 kW.

How many solar panels do I need for my house? Divide your monthly units by 120 to get the system size in kW, then divide by your panel’s wattage. For 450 units a month that is 3.75 kW, so a 4 kW system with 8 panels of 550 W.

How many solar panels are required for 3 kW? About 6 panels of 550 W (3.3 kW) or 8 panels of 400 W (3.2 kW).

How many solar panels are required for 5 kW? About 9 to 10 panels of 550 W, or 13 panels of 400 W.

How many solar panels for 1 kW? About 2 panels of 550 W, or 3 panels of 400 W.

How many solar panels for 10 kW? About 18 to 19 panels of 550 W, or 25 panels of 400 W.

How many solar panels do I need for a 2 ton AC? About 4 to 5 panels of 550 W if the AC runs around 8 hours a day. A non-inverter AC needs more.

How much roof space do I need for 1 kW of solar? The panels take about 5 m² (55 sq ft), and you should plan for 80-100 sq ft of shadow-free roof once spacing is included.

How many units does a 1 kW solar system produce? About 4 units a day, or 1,400-1,500 units a year in most of India. Output is higher in sunnier states and lower in cloudy ones.

Conclusion

Most Indian homes need 2 to 5 kW of solar, which is about 2 panels per kW: 6 panels for 3 kW, 9 to 10 for 5 kW and 18 to 19 for 10 kW. Start from your electricity bill, not your roof or home size, and check the result in our rooftop solar calculator. Then get a written quote and a roof survey from an installer before you buy. If you plan to claim the subsidy, see how to apply for PM Surya Ghar online.

Sources and notes

Panel counts and units follow the method on our methodology page (about 5 peak sun hours a day, 20% system losses), using 550 W and 400 W panels as examples. Subsidy figures are as reported in 2026 guides such as Voltflow and Heaven Green Energy; confirm on the official portal, pmsuryaghar.gov.in. Figures are approximate and vary by location, panel and usage. This post is general information, not financial or engineering advice.